Skip to content

Publication System Design Laboratory

Home Publication Journal
✔ 뷰어로 보기
International Journal
2016.10.20 07:00

Sung-Kyoon Kim, Myung-Il Roh, Ki-Su Kim, “Arrangement Method of Offshore Topside Based on an Expert System and Optimization Technique”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 139, No. 2, pp. 1-19, 2017.04.01

SyDLab
조회 수 1979
Atachment
첨부 '1'
?

단축키

Prev이전 문서

Next다음 문서

가 크게 작게 위로 아래로 댓글로 가기 인쇄
?

단축키

Prev이전 문서

Next다음 문서

가 크게 작게 위로 아래로 댓글로 가기 인쇄
Extra Form
Abstract An offshore platform has several modules that contain much of the equipment needed for oil and gas production, and these are placed on the limited space of the topside. Furthermore, the equipment layout should leave sufficient space in between to ensure operability, maintainability, and safety. Thus, the design problem to arrange the topside of an offshore platform can be difficult to solve due to the number of modules and equipment placed on the topside. This study proposes a method to arrange the offshore topside based on an expert system and multistage optimization in order to obtain the optimal arrangement that addresses various considerations and satisfies the given requirements. The proposed method consists of four components. First, an expert system is proposed to systematically computerize experts’ knowledge and experience and to evaluate the feasibility of alternatives for the arrangement of the offshore topside. Second, a multistage optimization method is proposed to yield a better arrangement design by formulating the arrangement design problem as an optimization problem with two stages. Third, an
arrangement template model (ATM) was proposed to store the arrangement data of the offshore topside. Fourth, the user interface was developed to run the expert system and for optimization. A prototype program was then developed to solve an floating, production, storage, and offloading (FPSO) topside problem in order to evaluate the applicability of the proposed method. The results showed that the proposed method can be used to obtain the optimal arrangement of an offshore topside.
Publication Date 2017-04-01
Role Corresponding Author
Category SCIE
Impact Factor 0.806

Sung-Kyoon Kim, Myung-Il Roh, Ki-Su Kim, “Arrangement Method of Offshore Topside Based on an Expert System and Optimization Technique”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 139, No. 2, pp. 1-19, 2017.04.01

위로 아래로 댓글로 가기 인쇄

  1. 전도현, 노명일, 함승호, 이혜원, “블록의 탑재 안전성을 위한 초기 평형 자세 탐색 방법 연구”, 대한조선학회 논문집, Vol. 55, No. 4, pp. 297-305, 2018.08.01

    CategoryDomestic Journal
    Read More

  2. Min-Jae Oh, Myung-Il Roh, Tae-Wan Kim, "Local T-spline Surface Skinning with Shape Preservation", Computer-Aided Design, Vol. 104, pp. 15-26, 2018.11.01

    CategoryInternational Journal
    Read More

  3. Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Hoe-Ryong Jung, Jong-Jin Park, "Method for a Simultaneous Determination of the Path and the Speed for Ship Route Planning Problems", Ocean Engineering, Vol. 157, pp. 301-312, 2018.06.01

    CategoryInternational Journal
    Read More

  4. 오민재, 노명일, 박성우, 김성훈, “빅데이터 분석을 이용한 해양 구조물 배관 자재의 소요량 예측”, 대한조선학회 논문집, Vol. 55, No. 3, pp. 243-251, 2018.06.01

    CategoryDomestic Journal
    Read More

  5. Sun-Kyung Jung, Myung-Il Roh, Ki-Su Kim, "Arrangement Method of a Naval Surface Ship Considering Stability, Operability, and Survivability", Ocean Engineering, Vol. 152, pp. 316-333, 2018.02.23

    CategoryInternational Journal
    Read More

  6. 명세현, 노명일, 최형순, “조선 PLM을 위한 핵심 평가 지표 수립 방법론”, 한국CDE학회 논문집, Vol. 23, No. 1, pp. 60-67, 2018.03.01

    CategoryDomestic Journal
    Read More

  7. Seung-Ho Ham, Myung-Il Roh, Luman Zhao, "Integrated Method of Analysis, Visualization, and Hardware for Ship Motion Simulation", Journal of Computational Design and Engineering, Vol. 5, No. 3, pp. 285-298, 2018.07.01

    CategoryInternational Journal
    Read More

  8. Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Anti-Sway Control of the Crane on an Offshore Support Vessel Based on the Hardware-In-The-Loop Simulation", International Journal of Offshore and Polar Engineering, Vol. 28, No. 2, pp. 182-189, 2018.06.01

    CategoryInternational Journal
    Read More

  9. Seung-Ho Ham, Myung-Il Roh, Ju-Sung Kim, "Numerical Analysis of Wreck Removal Based on Multibody System Dynamics", Journal of Marine Science and Technology, Vol. 23, No. 3, pp. 521-535, 2018.09.01

    CategoryInternational Journal
    Read More

  10. Ki-Su Kim, Myung-Il Roh, Sung-Min Lee, Han-Sung Kim, Hyunsik Ahn, "Weight-estimation Method of FPSO Topsides Considering the Work Breakdown Structure", Journal of Offshore Mechanics and Arctic Engineering, Vol. 40, No. 1, pp. 1-10, 2018.02.01

    CategoryInternational Journal
    Read More

  11. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, “Case Study of Detection and Maneuvering Performance of Naval Ships Using Engagement Simulation of Engineering Level”, Ocean Systems Engineering, Vol. 7, No. 3, pp. 247-273, 2017.09.01

    CategoryInternational Journal
    Read More

  12. Seung-Ho Ham, Myung-Il Roh, Jung-Woo Hong, “Dynamic Effect of a Flexible Riser in a Fully Connected Semisubmersible Drilling Rig Using the Absolute Nodal Coordinate Formulation”, Journal of Offshore Mechanics and Arctic Engineering, 2017.10.01

    CategoryInternational Journal
    Read More

  13. 이혜원, 노명일, 함승호, 조로만, 김낙완, 하솔, 우주현, 정우현, 유찬우, “무인수상정의 기뢰 탐지 임무 수행을 위한 통합 시뮬레이션 방법 연구”, 한국CDE학회 논문집, Vol. 22, No. 3, pp. 306-316, 2017.09.01

    CategoryDomestic Journal
    Read More

  14. Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, Jin-Wuk Hong, Hong-Rae Lee, "Development and Validation of a Simulation-based Safety Evaluation Program for a Mega Floating Crane", Advances In Engineering Software, Vol. 112, pp. 101-116, 2017.10.01

    CategoryInternational Journal
    Read More

  15. Seong-Hoon Kim, Myung-Il Roh, Ki-Su Kim, Min-Jae Oh, “Big Data Platform Based on Hadoop and Application to Weight Estimation of FPSO Topside”, Journal of Advanced Research in Ocean Engineering, Vol. 3, No. 1, pp. 32-40, 2017.03.01

    CategoryInternational Journal
    Read More

  16. Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, "Optimum Design of Lug Arrangement Based on Static and Dynamic Analyses for Block Lifting", Journal of Ship Production and Design, Vol. 34, No. 2, pp. 119-133, 2018.05.01

    CategoryInternational Journal
    Read More

  17. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Chan-Young Lee, “Performance Analyses of Naval Ships Based on Engineering Level of Simulation at the Initial Design Stage”, IJNAOE, Vol. 9, No. 4, pp. 446-459, 2017.07.01

    CategoryInternational Journal
    Read More

  18. Sung-Kyoon Kim, Myung-Il Roh, Ki-Su Kim, “Evaluation of Feasibility Index in the Arrangement Design of an Offshore Topside based on the Automatic Transformation of Experts’ Knowledge and the Fuzzy Logic”, Ocean Engineering, Vol. 130, 2017.01.15

    CategoryInternational Journal
    Read More

  19. Sung-Kyoon Kim, Myung-Il Roh, Ki-Su Kim, “Arrangement Method of Offshore Topside Based on an Expert System and Optimization Technique”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 139, No. 2, pp. 1-19, 2017.04.01

    CategoryInternational Journal
    Read More

  20. Ju-Sung Kim, Myung-Il Roh, Seung-Ho Ham, “A Method for Intermediate Flooding and Sinking Simulation of a Damaged Floater in Time Domain”, Journal of Computational Design and Engineering, Vol. 4, No. 1, pp. 1-13, 2017.01.01

    CategoryInternational Journal
    Read More
Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 11 Next
/ 11

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소