Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, "Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost", Journal of Marine Science and Engineering, Vol. 8, No. 5, pp. 353:1-15, 2020.05.16
International Journal
2020.05.14 16:13
Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, “Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost”, Journal of Marine Science and Engineering, Vol. 8, No. 5
조회 수 1876
| 첨부 '1' |
|---|
| Abstract | Thermal insulation panels are installed on the inner walls of liquefied natural gas (LNG) tanks of an LNG carrier to maintain the cryogenic temperature. Mastic ropes are used to attach thermal insulation panels to the inner walls and to fill the gap between the walls and panels. Because the inner walls of the LNG tanks can be corrugated owing to production errors, a large amount of mastic ropes are required to maintain the flatness of the thermal insulation panels. Therefore, in this study, an optimization method is proposed to minimize the total amount of mastic ropes for satisfying the flatness criterion of thermal insulation panels. For this purpose, an optimization problem is mathematically formulated. An objective function is used to minimize the total amount of mastic ropes considering constraints to flatten the thermal insulation panels. This function is applied to the design of membrane-type LNG tanks to verify the effectiveness and feasibility of the proposed method. Consequently, we confirm that the proposed method can provide a more effective arrangement design of mastic ropes compared with manual design. |
|---|---|
| Publication Date | 2020-05-16 |
| Role | Corresponding Author |
| Category | SCIE |
| Impact Factor | 2.033 |
-
Seung-Ho Ham, Myung-Il Roh, “Time-domain Structural Analysis During Block Turnover and Lifting Using 2D Flexible Multibody Dynamics”, Marine Structures, Vol. 75, pp. 102841.1-26, 2021.01.01
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01
-
함승호, 노명일, 이종혁, “다목적 조선 해양 전용 시뮬레이터 개발을 위한 통합 시뮬레이션 방법”, 한국CDE학회 논문집, Vol. 25, No. 2, pp. 161-172, 2020.06.01
-
Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, “Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost”, Journal of Marine Science and Engineering, Vol. 8, No. 5
-
Seong-Hoon Kim, Myung-Il Roh, Min-Jae Oh, Sung-Woo Park, "Estimation of Ship Operational Efficiency from AIS Data Using Big Data Technology", IJNAOE, Vol. 12, pp. 440-453, 2020.05.21
-
Sang-Hyun Lee, Myung-Il Roh, Min-Jae Oh, Ki-Su Kim, "Optimal Layout Design of an LNG FPSO: A Case Study", Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, No. 041403, pp. 1-17, 2020.08.01
-
Joo-Pil Lee, Myung-Il Roh, Hye-Won Lee, Seung-Ho Ham, "Design of a Wreck Removal Method Considering Safety and Economy", Ships and Offshore Structures, Vol. 15, No. 10, pp. 1037-1056, 2020.12.01
-
Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, "Collision Detection and Response of Multibody Systems Using a Position Difference Method and Non-Interpenetration Constraint in Shipbuilding Simulation", Ocean Engineering, Vol. 195, pp. 1-18, 2020.01.01
-
Luman Zhao, Myung-Il Roh, "COLREGs-Compliant Multiship Collision Avoidance Based on Deep Reinforcement Learning", Ocean Engineering, Vol. 191, pp. 1-15, 2019.11.01
-
오민재, 노명일, 김범수, 김용환, “선박 내항성능 해석을 위한 선형 곡면으로부터의 오프셋 생성 프로그램 개발”, 한국CDE학회 논문집, Vol. 24, No. 2, pp. 1-10, 2019.06.01
-
조영인, 오민재, 석영수, 이성준, 노명일, “딥러닝을 이용한 선형 설계 초기 단계에서의 저항 추정”, 한국CDE학회 논문집, Vol. 24, No. 2, pp. 1-8, 2019.06.01
-
Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01
-
Xing Li, Myung-Il Roh, Seung-Ho Ham, "A Collaborative Simulation in Shipbuilding and the Offshore Installation Based on the Integration of the Dynamic Analysis, Virtual Reality, and Control Devices", IJNAOE, Vol. 11, No. 2, pp. 699-722, 2019.07.01
-
Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Se-Hyun Myung, "Big Data-based Piping Material Analysis Framework in Offshore Structure for Contract Design", Ocean Systems Engineering, Vol. 9, No. 1, pp. 79-95, 2019.01.01
-
Seung-Ho Ham, Myung-Il Roh, "Dynamic Analysis of Block Offloading Using Self-propelled Modular Transporters", Automation in Construction, Vol. 96, pp. 411-432, 2018.12.01
-
Min-Jae Oh, Taw-Wan Kim, Myung-Il Roh, "G1 Bezier Surface Interpolation with T-junctions at a 3-Valent Singular Vertex", Computer Aided Geometric Design, Vol. 67, pp. 79-95, 2018.12.01
-
Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5
-
Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01
-
Hyun-Cheol Kim, Myung-Il Roh, Soon-Hung Han, "Passenger Evacuation Simulation of MV SEWOL Considering the Heeling Angle Change During Sinking", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 1, pp. 329-343, 2019.01.01
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01
