노명일, 이상욱, 이규열, 임중현, 강성찬, "통합 선박 설계 지원을 위한 객체 지향 초기 선체 구조 설계 시스템 개발", 2004년도 한국CAD/CAM학회 학술발표회, 평창, pp. 591-600, 2004.02.12-14
Domestic Conference
2013.12.04 15:48
노명일, 이상욱, 이규열, 임중현, 강성찬, "통합 선박 설계 지원을 위한 객체 지향 초기 선체 구조 설계 시스템 개발", 2004년도 한국CAD/CAM학회 학술발표회, 평창, pp. 591-600, 2004.02.12-14
조회 수 8917
첨부 '1' |
---|
Abstract | In the initial ship design stage of shipyards, the hull form design, the basic design, and the hull structural design are being performed by different systems. Thus, the problem on interfaces between these systems occurs. To solve this, we developed the hull form design system "EzHULL" and the compartment modeling and ship calculation system "EzCOMPART" for developing finally an integrated ship design system. And, in this study, se present and object-oriented, hull structural design system "EzSTRUCT", which is developed recently. A structural design in an initial design stage can be frequently changed, because the design is not firmly determined yet. Therefore, designers perform the simplified structural modeling with bigger structural part such as deck, longitudinal bulkhead, etc. in the initial design stage, and the detailed structural modeling with smaller structural parts such as plate, seam, slotm, etc. in the detailed design stage. However, the existing hull structural CAD system used in a shipyard is not efficient in generating a 3D CAD model in the initial design stage, because it has difficulty in handling frequent changes in design, Therem designers initially draw 2D drawings in the initial design stage, and generate the 3D CAD model from these 2D drawing in the detailed design and production design stage. In this study, the hull structural design system, shich can efficiently generate a 3D CAD model through rapid modeling at an initial design stage, was developed in this study, To evaluate the applicability of the developed system, we applied it to hull structural modeling of various ships such as a VLCC, a bulk carrier, etc. As a result, it could efficiently generate a 3D CAD model of a hull structure. |
---|---|
Publication Date | 2004-02-12 |
Prev 노명일, 이규열, 이정우, 이재승, "근골격계 질환 예방을 위한 조선용 작업 지원 로봇의 개념 설계", 2007년도 한국CAD/CAM학회 학술발표회, 평창, pp. 726-734, 2007.01.31-02.02
노명일, 이규열, 이정우, 이재승, "근골격계 질환 예방을 위한 조선용 작업 지원 로봇의 개념 설계", 2007년도 한국CAD/CAM학회 학술발표회, 평창, pp. 726-734, 2007.01.31-02.02
2013.12.04by SyDLab
노명일, 조상래, 정준모, 김영제, 변정우, "손상 함정의 침... Next
노명일, 조상래, 정준모, 김영제, 변정우, "손상 함정의 침...
2017.10.31by
-
노명일, 이상욱, 이규열, 임중현, 강성찬, "통합 선박 설계 지원을 위한 객체 지향 초기 선체 구조 설계 시스템 개발", 2004년도 한국CAD/CAM학회 학술발표회, 평창, pp. 591-600, 2004.02.12-14
CategoryDomestic Conference -
노명일, 조상래, 정준모, 김영제, 변정우, "손상 함정의 침수 해석 기반 복원성 평가 방법", 2017년도 함정기술무기체계 세미나, 부산, 2017.10.26-27
CategoryDomestic Conference -
노명일, 최우영, 이규열, "선체 구조 모델 기반의 쾌속 배관 모델링 시스템 개발", 2006년도 동계 선박설계연구발표회, 목포, pp. 1-14, 2006.02.16-17
CategoryDomestic Conference -
노명일, 최우영, 이규열, "쾌속 배관 라우팅 방법을 적용한 선체 구조 모델 기반의 배관 모델링 시스템 개발", 2006년도 한국CAD/CAM학회 학술발표회, 평창, pp. 272-279, 2006.02.09-11
CategoryDomestic Conference -
박동규, 노명일, 하지상, "무인 수상정의 개념 설계를 위한 주요 제원 최적화 방법", 2023년도 한국해군과학기술학회 동계학술발표회, 대전, pp. 110-141, 2023.12.07-08
CategoryDomestic Conference -
박동규, 노명일, 하지상, "최적화 기법을 활용한 무인 수상정의 초기 제원 결정", 2023년도 대한조선학회 추계학술발표회, 울산, pp. 111, 2023.11.02-03
CategoryDomestic Conference -
박동규, 노명일, 하지상, "추진 체계 선정을 포함한 무인수상정 초기 제원 최적화 방법", 2024년도 한국CDE학회 동계학술발표회, 평창, pp. 241, 2024.01.29-02.01
CategoryDomestic Conference -
박성우, 노명일, "작업성 및 효율성을 고려한 해양구조물 배관 설계 자동화 방법 연구", 2017년도 대한조선학회 추계학술발표회, 여수, 2017.11.02-03
CategoryDomestic Conference -
박성우, 노명일, 오민재, "빅데이터 기반 선박 및 해양 구조물의 데이터 마이닝 방법", 2018년도 대한조선학회 추계학술발표회, 창원, pp. 211-212, 2018.11.8-9
CategoryDomestic Conference -
박성우, 노명일, 오민재, 김성훈, "빅데이터 기술을 이용한 자재 연관성 평가를 위한 연구", 2017년도 해양플랜트설계연구회 추계워크샵, 목포, 2017.11.16-17
CategoryDomestic Conference