Skip to content
Extra Form
Abstract When a ship is damaged at sea, it is important to predict its behavior as well as whether it is to sink or not. If the ship comes to an equilibrium, the equilibrium position and time should be estimated; otherwise, the time to sink should be estimated. Furthermore, flooding analysis should be carried out not only during the design stage of the ship for preventive reasons, but also after an accident for a better investigation of its causes. In addition, flooding analysis methods that can provide predictions in case of an accident are of particular importance, as there is no time for the required calculations in an emergency. For this purpose, a quasi-static flooding analysis method for the damaged ship in the time domain is proposed in this study. There are a number of studies in which the equilibrium position and time were estimated by flooding analysis. However, most of them have not considered the air pressure effect in fully flooded compartments, and the method of determining the fluid volume in these compartments was not accurate. In the present study, the virtual vent and accumulator method are used to calculate the reference pressure in the fully flooded compartments, and the compartment shape is considered by using polyhedral integration. Also, spilled oil and solid cargo items from the damaged ship are taken into account for realistic flooding analysis. Finally, the damage stability criteria were checked not only in the final state, but also during the entire time of the flooding, as the intermediate states can be more hazardous than the final state. To validate the feasibility of the proposed method, it was applied to a naval ship, which is considerably more stringent for damage stability. As a result, we checked the availability of this study.
Publication Date 2022-02-10
Role Corresponding Author
Category SCIE
Impact Factor 0.940

Ki-Su Kim, Myung-Il Roh, Seung-Min Lee, "Quasi-static Flooding Analysis Method of a Damaged Ship Considering Oil Spill and Cargo Load", Journal of Ship Production and Design, Vol. 38, No. 1, pp. 39-59, 2022.02.10

https://doi.org/10.5957/JSPD.10180037


  1. Ki-Su Kim, June-Beom Lee, Myung-Il Roh, Ki-Min Han, Gap-Heon Lee, "Prediction of Ocean Weather Based on Denoising AutoEncoder and Convolutional LSTM", Journal of Marine Science and Engineering, Vol. 8, No. 10, pp. 805:1-24, 2020.10.14

    CategoryInternational Journal
    Read More
  2. Ki-Su Kim, Myung-Il Roh, "A Submarine Arrangement Design Program Based on the Expert System and the Multistage Optimization", Advances In Engineering Software, Vol. 98, No. 97-111, 2016.08.01

    CategoryInternational Journal
    Read More
  3. Ki-Su Kim, Myung-Il Roh, "Dynamic Flooding Analysis Method for Intermediate Flooding Process of a Ship", Ocean Engineering, Vol. 218, pp. 108173.1-33, 2020.12.15

    CategoryInternational Journal
    Read More
  4. Ki-Su Kim, Myung-Il Roh, Seung-Min Lee, "Quasi-static Flooding Analysis Method of a Damaged Ship Considering Oil Spill and Cargo Load", Journal of Ship Production and Design, 2022.02.10

    CategoryInternational Journal
    Read More
  5. Ki-Su Kim, Myung-Il Roh, Sol Ha, "Expert System Based on the Arrangement Evaluation Model for the Arrangement Design of a Submarine", Expert Systems with Applications, Vol. 42, No. 22, pp. 8731-8744, 2015.12.01

    CategoryInternational Journal
    Read More
  6. Ki-Su Kim, Myung-Il Roh, Sung-Min Lee, Han-Sung Kim, Hyunsik Ahn, "Weight-estimation Method of FPSO Topsides Considering the Work Breakdown Structure", Journal of Offshore Mechanics and Arctic Engineering, Vol. 40, No. 1, pp. 1-10, 2018.02.01

    CategoryInternational Journal
    Read More
  7. Ki-Su Kim, Myung-Il Roh, “ISO 15016:2015-based Method for Estimating the Fuel Oil Consumption of a Ship”, Journal of Marine Science and Engineering, Vol. 8, No. 10, pp. 791:1-18, 2020.10.12

    CategoryInternational Journal
    Read More
  8. Kyu-Yeul Lee, Myung-Il Roh, "A Hybrid Optimization Method for Multidisciplinary Ship Design", Journal of Ship Technology Research, Vol. 47, No. 4, pp. 181-185, 2000.10.01

    CategoryInternational Journal
    Read More
  9. Kyu-Yeul Lee, Myung-Il Roh, "An Efficient Genetic Algorithm Using Gradient Information for Ship Structural Design Optimization", Journal of Ship Technology Research, Vol. 48, No. 4, pp. 161-170, 2001.11.01

    CategoryInternational Journal
    Read More
  10. Kyu-Yeul Lee, Myung-Il Roh, Hyuk-Su Jeong, "An Improved Genetic Algorithm for Multi-Floor Facility Layout Problems Having Inner Structure Walls and Passages", Computers & Operations Research, Vol. 32, No. 4, pp. 879-899, 2005.04.01

    CategoryInternational Journal
    Read More
  11. Kyu-Yeul Lee, Myung-Il Roh, Seonho Cho, "Multidisciplinary Design Optimization of Mechanical Systems Using Collaborative Optimization Approach", International Journal of Vehicle Design, Vol. 25, No. 4, pp. 353-368, 2001.11.01

    CategoryInternational Journal
    Read More
  12. Kyu-Yeul Lee, Seong-Nam Han, Myung-Il Roh, "An Improved Genetic Algorithm for Facility Layout Problems Having Inner Structure Walls and Passages", Computers & Operations Research, Vol. 30, No. 1, pp. 117-138, 2003.01.01

    CategoryInternational Journal
    Read More
  13. Kyu-Yeul Lee, Seong-Nam Han, Myung-Il Roh, "Optimal Compartment Layout Design for a Naval Ship Using an Improved Genetic Algorithm", Marine Technology and SNAME News, Vol. 39, No. 3, pp. 159-169, 2002.07.01

    CategoryInternational Journal
    Read More
  14. Kyu-Yeul Lee, Seonho Cho, Myung-Il Roh, "An Efficient Global-Local Hybrid Optimization Method Using Design Sensitivity Analysis", International Journal of Vehicle Design, Vol. 28, No. 4, pp. 300-317, 2002.07.01

    CategoryInternational Journal
    Read More
  15. Kyu-Yeul Lee, Won-Joon Lee, Myung-Il Roh, "Development of a Semantic Product Modeling System for Initial Hull Structure in Shipbuilding", Robotics and Computer-Integrated Manufacturing Journal, Vol. 20, No. 3, pp. 211-223, 2004.06.01

    CategoryInternational Journal
    Read More
  16. Luman Zhao, Myung-Il Roh, "COLREGs-Compliant Multiship Collision Avoidance Based on Deep Reinforcement Learning", Ocean Engineering, Vol. 191, pp. 1-15, 2019.11.01

    CategoryInternational Journal
    Read More
  17. Luman Zhao, Myung-Il Roh, Jeong-Woo Hong, "Optimal Thrust Allocation for Dynamic Positioning of Deep-sea Working Vessel", Journal of Advanced Research in Ocean Engineering, Vol. 1, No. 2, pp. 94-105, 2015.06.01

    CategoryInternational Journal
    Read More
  18. Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Anti-Sway Control of the Crane on an Offshore Support Vessel Based on the Hardware-In-The-Loop Simulation", International Journal of Offshore and Polar Engineering, Vol. 28, No. 2, pp. 182-189, 2018.06.01

    CategoryInternational Journal
    Read More
  19. Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5

    CategoryInternational Journal
    Read More
  20. Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01

    CategoryInternational Journal
    Read More
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소