Skip to content
Extra Form
Abstract At the initial process planning and scheduling stage of a ship, the generation task of the production material information of a building block and the simulation task of the block erection have been manually performed using 2D drawings, etc. To make these tasks automatic, an accurate generation method for the production material information and a convenient simulation method for block erection using a 3D CAD model are developed in this study. For this, a 3D CAD model for a whole hull structure is generated first, and the block division method for dividing the 3D CAD model into a number of building blocks is then developed using the relationship between the hull structural parts. A generation method for the production material information for calculating the weight, etc., of a building block is developed. A simulation method for block erection is also developed using the composition and erection sequence information of erection blocks. Finally, to evaluate the developed methods, these methods are applied to corresponding processes of a deadweight 300 000-ton very large crude oil carrier. As a result, it is shown that the production material information can be accurately generated and the block erection can be conveniently simulated at the initial design stage.
Publication Date 2007-10-01
Role First Author
Category SCI

Myung-Il Roh, Kyu-Yeul Lee, "Generation of the Production Material Information of a Building Block and Simulation of the Block Erection for Computer-Aided Process Planning and Scheduling in Shipbuilding", International Journal of Production Research, Vol. 45, No. 20, pp. 4653-4683, 2007.10.01


  1. Myung-Il Roh, "Block Layout Method in the Block Stockyard Based on the Genetic Algorithm", Ocean Systems Engineering, Vol. 2, No. 4, pp. 271-287, 2012.12.01

    CategoryInternational Journal
    Read More
  2. Myung-Il Roh, "Determination of an Economical Shipping Route Considering the Effects of Sea State for Lower Fuel Consumption", International Journal of Naval Architecture and Ocean Engineering, Vol. 5, No. 2, pp. 246-262, 2013.06.01

    CategoryInternational Journal
    Read More
  3. Myung-Il Roh, Ju-Hwan Cha, "A Block Transportation Scheduling System Considering a Minimization of Travel Distance without Loading of and Interference between Multiple Transporters", International Journal of Production Research, Vol. 49, No. 11, pp. 3231-3250, 2011.06.01

    CategoryInternational Journal
    Read More
  4. Myung-Il Roh, Kyu-Yeul Lee, "An Initial Hull Structural Modeling System for Computer-Aided Process Planning in Shipbuilding", Advances In Engineering Software, Vol. 37, No. 7, pp. 457-476, 2006.07.01

    CategoryInternational Journal
    Read More
  5. Myung-Il Roh, Kyu-Yeul Lee, "Development of a 3D CAD System for Modeling Hull Structure at the Initial Ship Design Stage", Ships and Offshore Structures, Vol. 1, No. 2, pp. 135-151, 2006.04.01

    CategoryInternational Journal
    Read More
  6. Myung-Il Roh, Kyu-Yeul Lee, "Generation of the 3D CAD Model of the Hull Structure at the Initial Ship Design Stage and Its Application", Computers in Industry, Vol. 58, No. 6, pp. 539-557, 2007.08.01

    CategoryInternational Journal
    Read More
  7. Myung-Il Roh, Kyu-Yeul Lee, "Generation of the Production Material Information of a Building Block and Simulation of the Block Erection for Computer-Aided Process Planning and Scheduling in Shipbuilding", International Journal of Production Research, Vol. 45, No. 20, pp. 4653-4683, 2007.10.01

    CategoryInternational Journal
    Read More
  8. Myung-Il Roh, Kyu-Yeul Lee, "Optimal Scheduling of Block Lifting in Consideration of the Minimization of Traveling Distance While Unloaded and Wire and Shackle Replacement of a Gantry Crane", Journal of Marine Science and Technology, Vol. 15, No. 2, pp. 190-200, 2010.06.01

    CategoryInternational Journal
    Read More
  9. Myung-Il Roh, Kyu-Yeul Lee, Seong-Jin Yoo, "An Algorithm for Generating the Hull Structural Analysis Model Using the Seam Information of the Hull Structure at the Initial Design Stage", Journal of Ship and Ocean Technology, Vol. 10, No. 4, pp. 24-33, 2006.12.01

    CategoryInternational Journal
    Read More
  10. Myung-Il Roh, Kyu-Yeul Lee, Woo-Young Choi, "Rapid Generation of the Piping Model Having the Relationship with a Hull Structure in Shipbuilding", Advances In Engineering Software, Vol. 38, No. 4, pp. 215-228, 2007.04.01

    CategoryInternational Journal
    Read More
  11. Myung-Il Roh, Kyu-Yeul Lee, Woo-Young Choi, Seong-Jin Yoo, "Improvement of Ship Design Practice Using a 3D CAD Model of a Hull Structure", Robotics and Computer-Integrated Manufacturing Journal, Vol. 24, No. 1, pp. 105-124, 2008.02.01

    CategoryInternational Journal
    Read More
  12. Myung-Il Roh, Sol Ha, "Advanced Ship Evacuation Analysis Using a Cell-Based Simulation Model", Computers In Industry, Vol. 64, No. 1, pp. 80-89, 2013.01.01

    CategoryInternational Journal
    Read More
  13. Nam-Kug Ku, Ara Jo, Sol Ha, Myung-Il Roh, Kyu-Yeul Lee, "Automatic Generation of Equations of Motion for Multibody System in Discrete Event Simulation Framework", Procedia Technology, Vol. 1, No. 1, pp. 55-64, 2012.02.01

    CategoryInternational Journal
    Read More
  14. Nam-Kug Ku, Ji-Hyun Hwang, Joon-Chae Lee, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Module Layout for a Generic Offshore LNG Liquefaction Process of LNG-FPSO", Ships and Offshore Structures, Vol. 9, No. 3, pp. 311-332, 2014.05.01

    CategoryInternational Journal
    Read More
  15. Nam-Kug Ku, Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "A Tagline Proportional-Derivative Control Method for the Anti-Swing Motion of a Heavy Load Suspended by a Floating Crane in Waves", Journal of Engineering for the Maritime Environment, Vol. 227, No. 4, pp. 357-366, 2013.11.01

    CategoryInternational Journal
    Read More
  16. Nam-Kug Ku, Myung-Il Roh, "Dynamic Response Simulation of an Offshore Wind Turbine Suspended by a Floating Crane", Ships and Offshore Structures, Vol. 10, No. 6, pp. 621-634, 2015.11.01

    CategoryInternational Journal
    Read More
  17. Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Crane Modeling and Simulation in Offshore Structure Building Industry", International Journal of Computer Theory and Engineering, Vol. 6, No. 3, pp. 278-284, 2014.06.01

    CategoryInternational Journal
    Read More
  18. Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Design of Controller for Mobile Robot in Welding Process of Shipbuilding Engineering", Journal of Computational Design and Engineering, Vol. 1, No. 4, pp. 243-255, 2014.10.01

    CategoryInternational Journal
    Read More
  19. Sang-Hyun Lee, Myung-Il Roh, Min-Jae Oh, Ki-Su Kim, "Optimal Layout Design of an LNG FPSO: A Case Study", Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, No. 041403, pp. 1-17, 2020.08.01

    CategoryInternational Journal
    Read More
  20. Sang-Uk Lee, Myung-Il Roh, Ju-Hwan Cha, Kyu-Yeul Lee, "Ship Compartment Modeling Based On a Non-manifold Polyhedron Modeling Kernel", Advances In Engineering Software, Vol. 40, No. 5, pp. 378-388, 2009.05.01

    CategoryInternational Journal
    Read More
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소