Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01
International Journal
2016.03.24 11:09
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01
조회 수 321
첨부 '1' |
---|
Abstract | Ship and offshore plants are constructed with cranes on the dock by joining several blocks, which are basic units for design and production in shipbuilding. In the joining process, the erection and turn‐over operation of a block can cause interference between the block and the wire ropes on the cranes. To identify such a possibility in advance, lifting simulation, which is a kind of dynamic simulation, can be used based on multibody system dynamics. At this time, it is necessary to calculate the contact forces exerted on the block because the block can be damaged or structurally deformed if the contact forces become larger than the allowable value. However, if the lifting simulation is performed with the traditional wire rope model modeled by an incompressible spring, it is difficult to check whether the block and the wire ropes interfere with each other, and to calculate the contact forces exerted, if any. To perform a realistic lifting simulation, a wire rope model that takes interference into consideration is adopted in this study. In addition, a contact algorithm that consists of four steps is proposed to check contacts and to calculate the contact forces. First, the Möller algorithm, which is generally known as the fastest algorithm for triangle-ray intersection, is applied to detect the contacts. Second, the contacted wire rope is divided to cope with the contacts. Third, the contact forces are calculated with the sum of the tensions in the wire rope segments including a contact point. To verify the efficiency and applicability of the proposed method, it is applied to block turnover simulation. It can be seen that the contacts can be accurately checked, and the corresponding contact forces can be calculated if there are contacts between the block and the wire ropes on the crane. |
---|---|
Publication Date | 2016-07-01 |
Role | Corresponding Author |
Category | SCIE |
Impact Factor | 2.442 |
-
Xing Li, Myung-Il Roh, Seung-Ho Ham, "A Collaborative Simulation in Shipbuilding and the Offshore Installation Based on the Integration of the Dynamic Analysis, Virtual Reality, and Control Devices", IJNAOE, Vol. 11, No. 2, pp. 699-722, 2019.07.01
CategoryInternational Journal -
Won-Jae Lee, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Yeong-Min Cho, Nam-Sun Son, “Detection and Tracking for the Awareness of Surroundings of a Ship Based on Deep Learning”, Journal of Computational Design and Engineering, Vol. 8, No. 5
CategoryInternational Journal -
Tae-Sub Um, Myung-Il Roh, "Optimal Dimension Design of a Hatch Cover for Lightening a Bulk Carrier", International Journal of Naval Architecture and Ocean Engineering, Vol. 7, No. 2, pp. 270-287, 2015.03.01
CategoryInternational Journal -
Sung-Woo Park, Myung-Il Roh, Min-Jae Oh, Seong-Hoon Kim, "Association Analysis of Piping Materials of an Offshore Structure Using Big Data Technology", Journal of Ship Production and Design, Vol. 35, No. 3, pp. 220-230, 2019.08.01
CategoryInternational Journal -
Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, "Optimum Design of Lug Arrangement Based on Static and Dynamic Analyses for Block Lifting", Journal of Ship Production and Design, Vol. 34, No. 2, pp. 119-133, 2018.05.01
CategoryInternational Journal -
Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Hoe-Ryong Jung, Jong-Jin Park, "Method for a Simultaneous Determination of the Path and the Speed for Ship Route Planning Problems", Ocean Engineering, Vol. 157, pp. 301-312, 2018.06.01
CategoryInternational Journal -
Sung-Kyoon Kim, Myung-Il Roh, Ki-Su Kim, “Evaluation of Feasibility Index in the Arrangement Design of an Offshore Topside based on the Automatic Transformation of Experts’ Knowledge and the Fuzzy Logic”, Ocean Engineering, Vol. 130, 2017.01.15
CategoryInternational Journal -
Sung-Kyoon Kim, Myung-Il Roh, Ki-Su Kim, “Arrangement Method of Offshore Topside Based on an Expert System and Optimization Technique”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 139, No. 2, pp. 1-19, 2017.04.01
CategoryInternational Journal -
Sung-Jun Lee, Myung-Il Roh, Min-Jae Oh, "Image-based Ship Detection Using Deep Learning", Ocean Systems Engineering, Vol. 10, No. 4, pp. 415-434, 2020.12.01
CategoryInternational Journal -
Sun-Kyung Jung, Myung-Il Roh, Ki-Su Kim, "Arrangement Method of a Naval Surface Ship Considering Stability, Operability, and Survivability", Ocean Engineering, Vol. 152, pp. 316-333, 2018.02.23
CategoryInternational Journal -
Sol Ha, Tae-Sub Um, Myung-Il Roh, Hyun-Kyoung Shin, “A Structural Weight Estimation Model of FPSO Topsides Using an Improved Genetic Programming Method”, Ships and Offshore Structures, Vol. 12, No. 1, pp. 43-55, 2017.01.01
CategoryInternational Journal -
Sol Ha, Seong-Ho Seo, Myung-Il Roh, Hyun-Kyoung Shin, "Simplified Nonlinear Model for the Weight Estimation of FPSO Plant Topside Using the Statistical Method", Ships and Offshore Structures, Vol. 11, No. 6, pp. 603-619, 2016.09.01
CategoryInternational Journal -
Sol Ha, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Cell-Based Evacuation Simulation Considering Human Behavior in a Passenger Ship", Ocean Engineering, Vol. 53, pp. 138-152, 2012.10.01
CategoryInternational Journal -
Sol Ha, Nam-Kug Ku, Myung-Il Roh, Ho-Jin Hwang, "Multibody System Dynamics Simulator for Process Simulation of Ships and Offshore Plants in Shipyards", Advances In Engineering Software, Vol. 85, pp. 12-25, 2015.07.01
CategoryInternational Journal -
Sol Ha, Nam-Kug Ku, Myung-Il Roh, "Event-based Scenario Manager for Multibody Dynamics Simulation of Heavy Load Lifting Operations in Shipyards", International Journal of Naval Architecture and Ocean Engineering, Vol. 8, No. 1, pp. 83-101, 2016.01.01
CategoryInternational Journal -
Sol Ha, Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Implementation of the Submarine Diving Simulation in a Distributed Environment", International Journal of Naval Architecture and Ocean Engineering, Vol. 4, No. 3, pp. 211-227, 2012.09.01
CategoryInternational Journal -
Seung-Min Lee, Jong-Hyeok Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, Hye-Won Lee, "An Optimization Model of Tugboat Operation for Conveying a Large Surface Vessel", Journal of Computational Design and Engineering, Vol. 8, No. 2, 2021.04.01
CategoryInternational Journal -
Seung-Ho Ham, Myung-Il Roh, “Time-domain Structural Analysis During Block Turnover and Lifting Using 2D Flexible Multibody Dynamics”, Marine Structures, Vol. 75, pp. 102841.1-26, 2021.01.01
CategoryInternational Journal -
Seung-Ho Ham, Myung-Il Roh, Luman Zhao, "Integrated Method of Analysis, Visualization, and Hardware for Ship Motion Simulation", Journal of Computational Design and Engineering, Vol. 5, No. 3, pp. 285-298, 2018.07.01
CategoryInternational Journal -
Seung-Ho Ham, Myung-Il Roh, Jung-Woo Hong, “Dynamic Effect of a Flexible Riser in a Fully Connected Semisubmersible Drilling Rig Using the Absolute Nodal Coordinate Formulation”, Journal of Offshore Mechanics and Arctic Engineering, 2017.10.01
CategoryInternational Journal