Skip to content
Extra Form
Abstract During the building of an LNG tank, a thermal insulation panel, hereafter referred to as a “panel,” is installed on the inner wall to insulate the tank from external conditions. The inner wall of the LNG tank can experience deformations, leading to the panel becoming inclined and twisted, making it susceptible to damage and reducing its insulation effectiveness. To address this challenge, a common practice involves placing wedges at each corner of the panel between the inner tank wall and the panel, and then filling the resulting gaps with a mastic rope. However, this extensive use of mastic ropes to mitigate panel inclination and twisting is a costly solution. The primary objective of this study is to optimize the overall use of mastic ropes for enhanced tank insulation. This optimization is achieved by determining the ideal panel installation height, which is dependent on factors such as the wedge height, as well as panel inclination and twisting. These parameters serve as the objective functions and constraints for optimization. To validate the effectiveness and feasibility of the proposed method, tests were conducted by applying the proposed method to cover the inner wall of an LNG tank with insulation panels. The study considered four cases, each focusing on different objective functions related to the economic feasibility and safety of LNG tanks, and compared the results. In the most cost-effective solution, the total use of mastic ropes was reduced by approximately 42% compared to the conventional manual design. Furthermore, safety-related solutions demonstrated improved safety levels compared to the manual design, with only a marginal 0.1% change in the total use of mastic ropes. Lastly, in cases where both economic feasibility and safety were considered, improvements were observed in both aspects compared to the manual design.
Publication Date 2023-11-15
Role Corresponding Author
Category SCI

Do-Hyun Chun, Myung-Il Roh, In-Chang Yeo, Hye-Won Lee, “Proposed Method for Design Optimization of LNG Tanks Based on the Arrangement of Thermal Insulation Panels”, Ocean Engineering, Vol. 288, Part 2, pp. 116063.1-14, 2023.11.15

https://doi.org/10.1016/j.oceaneng.2023.116063


List of Articles
번호 분류 제목 Publication Date
183 International Journal Beom-Soo Kim, Min-Jae Oh, Jae-Hoon Lee, Yonghwan Kim, Myung-Il Roh, "Study on Hull Optimization Process Considering Operational Efficiency in Waves", Processes, Vol. 9, No. 5, pp. 898.1-21, 2021.05.19 file 2021-05-19
182 International Journal Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, "Automation of Crane Control for Block Lifting Based on Deep Reinforcement Learning", Journal of Computational Design and Engineering, Vol. 9, No. 4, pp. 1430- 1448, 2022.07.23 file 2022-07-23
181 International Journal Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Donghun Yu, "Method for Collision Avoidance Based on Deep Reinforcement Learning with Path-Speed Control for an Autonomous Ship", IJNAOE, Vol. 16, pp. 100579.1-19, 2023.12.22 file 2023-12-22
180 International Journal Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Donghun Yu, “Deep Reinforcement Learning-based Collision Avoidance for an Autonomous Ship”, Ocean Engineering, Vol. 234, pp. 1-20, 2021.08.15 file 2021-08-15
» International Journal Do-Hyun Chun, Myung-Il Roh, In-Chang Yeo, Hye-Won Lee, “Proposed Method for Design Optimization of LNG Tanks Based on the Arrangement of Thermal Insulation Panels”, Ocean Engineering, Vol. 288, Part 2, pp. 116063.1-14, 2023.11.15 file 2023-11-15
178 International Journal Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, “Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost”, Journal of Marine Science and Engineering, Vol. 8, No. 5 file 2020-05-16
177 International Journal Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Simulation of an Offshore Supply Vessel Considering Various Operating Conditions", Advances in Mechanical Engineering, Vol. 8, No. 6, pp. 1-13, 2016.06.16 file 2016-06-16
176 International Journal Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Chan-Young Lee, “Performance Analyses of Naval Ships Based on Engineering Level of Simulation at the Initial Design Stage”, IJNAOE, Vol. 9, No. 4, pp. 446-459, 2017.07.01 file 2017-07-01
175 International Journal Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, “Case Study of Detection and Maneuvering Performance of Naval Ships Using Engagement Simulation of Engineering Level”, Ocean Systems Engineering, Vol. 7, No. 3, pp. 247-273, 2017.09.01 file 2017-09-01
174 International Journal Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Off Simulation of an Offshore Supply Vessel Considering Ocean Environmental Loads and Lifting Off Velocity", Ocean Systems Engineering, Vol. 5, No. 3, pp. 181-198, 2015.09.01 file 2015-09-01
173 International Journal Donghun Yu, Myung-Il Roh, “Method for Anti-collision Path Planning Using Velocity Obstacle and A* Algorithms for a Maritime Autonomous Surface Ship”, International Journal of Naval Architecture and Ocean Engineering, Vol. 16, 2024.02.02 file 2024-02-02
172 International Journal Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, et al., "Integrated Simulation of Virtual Prototypes and Control Algorithms of Unmanned Surface Vehicles Based on a Robot Operating System", Journal of Marine Science and Technology (Taiwan) file 2021-09-03
171 International Journal Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01 file 2018-11-01
170 International Journal Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, “Ship Route Planning in Arctic Ocean Based on POLARIS”, Ocean Engineering, Vol. 234, pp. 109297.1-14, 2021.08.15 file 2021-08-15
169 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01 file 2016-07-01
168 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01 file 2020-12-01
167 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Underactuated Crane Control for the Automation of Block Erection in Shipbuilding", Automation in Construction, Vol. 124, pp. 1-28, 2021.04.01 file 2021-04-01
166 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01 file 2018-09-01
165 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of the Wireline Riser Tensioner System for a Mobile Offshore Drilling Unit Based on Multibody System Dynamics", Ocean Engineering, Vol. 106, pp. 485-495, 2015.09.15 file 2015-09-15
164 International Journal Hye-Won Lee, Myung-Il Roh, Yeong-Min Cho, Jeong-Ho Park, "Data Association for Autonomous Ships Based on the Virtual Simulation Environment", Ocean Engineering, Vol. 281, pp. 114646.1-17, 2023.08.01 file 2023-08-01
Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 Next
/ 10

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소