Skip to content
Extra Form
Abstract The liquefaction process is regarded as primary among all topside systems in liquefied natural gas floating production storage and offloading (LNG FPSO) applications. The liquefaction process, which typically accounts for 70% of the capital cost of topside process systems and 30 to 40% of the overall cost of LNG FPSO plants, condenses the separated and pre-treated natural gas into LNG. The volume of liquid occupies about 1/600th the volume of the natural gas. The cycles in the liquefaction process consist of seven main pieces of equipment: compressor, sea water cooler, expansion valve, heat exchanger, phase separator, tee, and common header. Many different types of liquefaction cycles are determined according to their respective synthesis and optimized operating conditions. This study first proposes the generic liquefaction model to represent various types of liquefaction cycles. Twenty-seven feasible liquefaction configurations derived from the generic model are selected to perform the most effective synthesis for the optimization of the liquefaction cycle. With the minimum amount of power required for the compressors, the optimized liquefaction cycle then is proposed by obtaining optimal operating conditions in 27 cases. The optimized liquefaction cycle is compared with the dual mixed refrigerant (DMR) cycle, which is considered for the application of LNG FPSO. Finally, the results show that the amount of power required for the operating conditions is decreased by 1.2% compared with that of the DMR cycle.
Publication Date 2012-06-17

Ji-Hyun Hwang, Nam-Kug Ku, Joon-Chae Lee, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Synthesis of LNG FPSO Liquefaction Cycles", Proceedings of ISOPE(International Society of Offshore and Polar Engineers) 2012, Rhodes, Greece, pp. 927-935, 2012.06.17-22


List of Articles
번호 분류 제목 Publication Date
26 International Conference Seong-Ho Seo, Myung-Il Roh, Nam-Kug Ku, Kyu-Yeul Lee, "Dynamic Response Simulation of an Offshore Wind Turbine Suspended by a Floating Crane", Proceedings of ISGMA(International Symposium on Green Manufacturing and Applications) 2012, Jeju, Korea, pp. 1-7, 2012.08.27-29 file 2012-08-27
25 International Conference Se-Yong Jeong, Seong-Ho Seo, Myung-Il Roh, "A Method for Determining a Ship Economic Route for Fuel Saving", Proceedings of ISGMA(International Symposium on Green Manufacturing and Applications) 2012, Jeju, Korea, pp. 1-5, 2012.08.27-29 file 2012-08-27
24 International Conference Tae-Sub Um, Jeong-Hoon Park, Myung-Il Roh, "Determination of Optimal Principal Dimensions of the Hatch Cover for Lightening of a Bulk Carrier", Proceedings of ISGMA(International Symposium on Green Manufacturing and Applications) 2012, Jeju, Korea, pp. 1-7, 2012.08.27-29 file 2012-08-27
» International Conference Ji-Hyun Hwang, Nam-Kug Ku, Joon-Chae Lee, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Synthesis of LNG FPSO Liquefaction Cycles", Proceedings of ISOPE(International Society of Offshore and Polar Engineers) 2012, Rhodes, Greece, pp. 927-935, 2012.06.17-22 file 2012-06-17
22 International Conference Nam-kug Ku, Sol Ha, Myung-Il Roh, Kyu-Yeul Lee, "Dynamic Response Analysis of Multibody System in Discrete Event Simulation", Proceedings of ICORES(International Conference on Operations Research and Enterprise Systems) 2012, Algarve, Portugal, pp. 447-453, 2012.02.04-06 file 2012-02-04
21 International Conference Kyu-Yeul Lee, Ju-Hwan Cha, Joon-Chae Lee, Myung-Il Roh, Ji-Hyun Hwang, "Determination of the Optimal Operating Condition of Dual Mixed Refrigerant Cycle at the Pre-FEED Stage of LNG FPSO Topside Liquefaction Process", Proceedings of ISOPE(International Society of Offshore and Polar Engineers) 2011, Maui, USA, pp. 151-158, 2011.06.19-24 file 2011-06-19
20 International Conference Yoon-Nam An, Joo-Sung Lee, Myung-Il Roh, Bum-Sang Yoon, Kyoung-Sik Chang, "Shape Optimization of Structural Member Based on Isogeometry Concept", Proceedings of the 24th Asian-Pacific TEAM(Technical Exchange and Advisory Meeting on Marine Structures) 2010, Vladivostok, Russia, pp. 343-348, 2010.08.23-26 file 2010-08-23
19 International Conference Yoon-Nam An, Joo-Sung Lee, Myung-Il Roh, Bum-Sang Yoon, Kyoung-Sik Chang, "Parametric Study of Mesh Refinement in Isogeometric Analysis", Proceedings of ISOPE(International Society of Offshore and Polar Engineers) 2010, Beijing, China, pp. 809-812, 2010.06.20-26 file 2010-06-20
18 International Conference Yoon-Nam An, Joo-Sung Lee, Myung-Il Roh, Bum-Sang Yoon, Kyoung-Sik Chang, "Parametric Study of Isogeometric Analysis Using NURBS", Proceedings of the 23rd Asian-Pacific TEAM(Technical Exchange and Advisory Meeting on Marine Structures) 2009, Kaohsiung, Taiwan, pp. 169-173, 2009.11.30-12.03 file 2009-11-30
17 International Conference Bo-Hyun Lee, Kyoung-Sik Chang, Bum-Sang Yoon, Joo-Sung Lee, Myung-Il Roh, "Large Eddy Simulation of Fully Turbulent Channel Flow Using Variational Multiscale Method", Proceedings of the 23rd Asian-Pacific TEAM(Technical Exchange and Advisory Meeting on Marine Structures) 2009, Kaohsiung, Taiwan, pp. 93-97, 2009.11.30-12.03 file 2009-11-30
Board Pagination Prev 1 ... 42 43 44 45 46 47 48 49 50 51 Next
/ 51

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소