Journal - 이수호, 안현식, 김한성, 허윤, 배재류, 김기수, 함승호, 이성민, 노명일, "FPSO Topsides Pipe Rack 견적 중량 추산 방법 연구", 대한조선학회 논문집, Vol. 53, No. 5, pp. 362-370, 2016.10.01

Atachment
첨부 '1'	SNAK(201610).pdf,

Extra Form
Abstract	The weight estimation and calculation of FPSO topsides is first performed at the bidding stage of projects. At this time, it is difficult to estimate and calculate accurately the weight because most of items of FPSO are not apparently defined. Especially, in the case of the pipe rack module, its portion of the total weight and the range of weight variation are large due to special features of piping and electric equipment in the module. Thus, it is very important to estimate and calculate accurately its weight in the task of the weight estimation and calculation of FPSO topsides. In this study, the past data for the weight of the pipe rack module were collected and analyzed, the WBS (Work Breakdown Structure) for the pipe rack module was constructed, and primary variables and secondary variables for developing a weight estimation and calculation model were selected. That is, after analyzing the past data, the volume was selected as the primary variable and the regression analysis was performed based on the variable. Then, several secondary variables were selected and incorporated into a weight estimation and calculation model. At this time, the weight per discipline was assumed from ratios of the total weight. Finally, the weight of the pipe rack module was estimated and calculated by using the developed model. As a result, the deviation from the model was better than that (-20% ~ 60 %) of other studies about the weight estimation and calculation of FPSO topsides. Thus, the validity and applicability of the weight estimation and calculation of the pipe rack could be checked.
Publication Date	2016-10-01
Role	Corresponding Author
Category	KCI

Abstract

The weight estimation and calculation of FPSO topsides is first performed at the bidding stage of projects. At this time, it is difficult to estimate and calculate accurately the weight because most of items of FPSO are not apparently defined. Especially, in the case of the pipe rack module, its portion of the total weight and the range of weight variation are large due to special features of piping and electric equipment in the module. Thus, it is very important to estimate and calculate accurately its weight in the task of the weight estimation and calculation of FPSO topsides. In this study, the past data for the weight of the pipe rack module were collected and analyzed, the WBS (Work Breakdown Structure) for the pipe rack module was constructed, and primary variables and secondary variables for developing a weight estimation and calculation model were selected. That is, after analyzing the past data, the volume was selected as the primary variable and the regression analysis was performed based on the variable. Then, several secondary variables were selected and incorporated into a weight estimation and calculation model. At this time, the weight per discipline was assumed from ratios of the total weight. Finally, the weight of the pipe rack module was estimated and calculated by using the developed model. As a result, the deviation from the model was better than that (-20% ~ 60 %) of other studies about the weight estimation and calculation of FPSO topsides. Thus, the validity and applicability of the weight estimation and calculation of the pipe rack could be checked.

Publication Date

2016-10-01

Role

Corresponding Author

Category

KCI

이수호, 안현식, 김한성, 허윤, 배재류, 김기수, 함승호, 이성민, 노명일, "FPSO Topsides Pipe Rack 견적 중량 추산 방법 연구", 대한조선학회 논문집, Vol. 53, No. 5, pp. 362-370, 2016.10.01

List of Articles
번호	분류	제목	Publication Date
»	Domestic Journal	이수호, 안현식, 김한성, 허윤, 배재류, 김기수, 함승호, 이성민, 노명일, "FPSO Topsides Pipe Rack 견적 중량 추산 방법 연구", 대한조선학회 논문집, Vol. 53, No. 5, pp. 362-370, 2016.10.01	2016-10-01
107	Domestic Journal	김성훈, 노명일, 김기수, "조선 해양 산업에서의 응용을 위한 하둡 기반의 빅데이터 플랫폼 연구", 한국CAD/CAM학회 논문집, Vol. 21, No. 3, pp. 334-340, 2016.09.01	2016-09-01
106	International Journal	Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Simulation of an Offshore Supply Vessel Considering Various Operating Conditions", Advances in Mechanical Engineering, Vol. 8, No. 6, pp. 1-13, 2016.06.16	2016-06-16
105	International Journal	Ki-Su Kim, Myung-Il Roh, "A Submarine Arrangement Design Program Based on the Expert System and the Multistage Optimization", Advances In Engineering Software, Vol. 98, No. 97-111, 2016.08.01	2016-08-01
104	International Journal	Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01	2016-07-01
103	International Journal	Jeong-Woo Hong, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of Subsea Equipment Installation Using an Offshore Support Vessel Based on Flexible Multibody System Dynamics", Journal of Marine Science and Technology (Taiwan), Vol. 24, No. 4	2016-08-01
102	Domestic Journal	이수호, 안현식, 허윤, 배재류, 김기수, 함승호, 이성민, 노명일, "해양 공사 EPC 견적용 중량 추산 방법에 관한 기초 연구", 대한조선학회 논문집, Vol. 53, No. 2, pp. 154-161, 2016.04.01	2016-04-01
101	Domestic Journal	김기수, 노명일, 김성용, 안진우, "잠수함의 구획 및 장비 배치 최적화를 위한 배치 템플릿 모델", 한국CAD/CAM학회 논문집, Vol. 21, No. 1, pp. 51-60, 2016.03.01	2016-03-01
100	International Journal	Sol Ha, Nam-Kug Ku, Myung-Il Roh, "Event-based Scenario Manager for Multibody Dynamics Simulation of Heavy Load Lifting Operations in Shipyards", International Journal of Naval Architecture and Ocean Engineering, Vol. 8, No. 1, pp. 83-101, 2016.01.01	2016-01-01
99	International Journal	Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, "Simulation of Load Lifting with Equalizers Used in Shipyards", Automation in Construction, Vol. 61, pp. 98-111, 2016.02.01	2016-02-01
98	International Journal	Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, Sol Ha, "Multibody Dynamic Analysis of a Heavy Load Suspended by a Floating Crane with Constraint-based Wire Rope", Ocean Engineering, Vol. 109, pp. 145-160, 2015.11.15	2015-11-15
97	International Journal	Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Off Simulation of an Offshore Supply Vessel Considering Ocean Environmental Loads and Lifting Off Velocity", Ocean Systems Engineering, Vol. 5, No. 3, pp. 181-198, 2015.09.01	2015-09-01
96	International Journal	Sol Ha, Tae-Sub Um, Myung-Il Roh, Hyun-Kyoung Shin, “A Structural Weight Estimation Model of FPSO Topsides Using an Improved Genetic Programming Method”, Ships and Offshore Structures, Vol. 12, No. 1, pp. 43-55, 2017.01.01	2017-01-01
95	International Journal	Luman Zhao, Myung-Il Roh, “A Thrust Allocation Method for Efficient Dynamic Positioning of a Semisubmersible Drilling Rig Based on the Hybrid Optimization Algorithm”, Mathematical Problems in Engineering, Vol. 2015, pp. 1-12, 2015.10.01	2015-10-01
94	Domestic Journal	함승호, 노명일, 김주성, 이혜원, 하솔, "환경 하중을 고려한 침몰 선체의 물리 기반 인양 시뮬레이션", 대한조선학회 논문집, Vol. 5, No. 5, pp. 387-394, 2015.10.01	2015-10-01
93	International Journal	Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of the Wireline Riser Tensioner System for a Mobile Offshore Drilling Unit Based on Multibody System Dynamics", Ocean Engineering, Vol. 106, pp. 485-495, 2015.09.15	2015-09-15
92	International Journal	Ki-Su Kim, Myung-Il Roh, Sol Ha, "Expert System Based on the Arrangement Evaluation Model for the Arrangement Design of a Submarine", Expert Systems with Applications, Vol. 42, No. 22, pp. 8731-8744, 2015.12.01	2015-12-01
91	International Journal	Luman Zhao, Myung-Il Roh, Jeong-Woo Hong, "Optimal Thrust Allocation for Dynamic Positioning of Deep-sea Working Vessel", Journal of Advanced Research in Ocean Engineering, Vol. 1, No. 2, pp. 94-105, 2015.06.01	2015-06-01
90	International Journal	Sol Ha, Seong-Ho Seo, Myung-Il Roh, Hyun-Kyoung Shin, "Simplified Nonlinear Model for the Weight Estimation of FPSO Plant Topside Using the Statistical Method", Ships and Offshore Structures, Vol. 11, No. 6, pp. 603-619, 2016.09.01	2016-09-01
89	International Journal	Sol Ha, Nam-Kug Ku, Myung-Il Roh, Ho-Jin Hwang, "Multibody System Dynamics Simulator for Process Simulation of Ships and Offshore Plants in Shipyards", Advances In Engineering Software, Vol. 85, pp. 12-25, 2015.07.01	2015-07-01

번호

분류

제목

Publication Date

Domestic Journal

이수호, 안현식, 김한성, 허윤, 배재류, 김기수, 함승호, 이성민, 노명일, "FPSO Topsides Pipe Rack 견적 중량 추산 방법 연구", 대한조선학회 논문집, Vol. 53, No. 5, pp. 362-370, 2016.10.01 file